CamCraft

User guide

Start here: Install → First run → Setups → Operations → Check → Post.

The sections below follow a job from the first model to the NC program. Use the guide navigation to find a stage of the job or a reference page.

The CAM fundamentals section explains the machining principles behind these steps: feeds and speeds, tools, strategy, rigidity, chips, finish, proving out and posts.

For task recipes (facing, two-setup squaring, pockets, holes, lathe, re-posting) see Common workflows.

Tools and tool libraries covers tool creation, holders, modular bodies, controller numbers, and library import and export.

The glossary defines the terms CamCraft uses, such as setup, work offset, stale, gouge and refusal, and links each to its page.

The Multi-axis section covers indexed 3+1 and 3+2, continuous 4-axis, simultaneous 5-axis, TCP and their checks.

Stuck on a message? See Troubleshooting.

  1. Getting started - Install CamCraft, learn the window and make a first toolpath.
  2. Set up the job - Import the model and define the stock, work offset, workholding and tools.
  3. Operations - The operation kinds, their settings tabs, and generating toolpaths.
  4. Check and post - Inspect the simulated cut, check the operation order and write the NC program.
  5. Multi-axis - Indexed and simultaneous multi-axis work: what CamCraft does for each kind, how to set it up, and what is checked.
  6. Automate - Use the command line, scripts and AI agents with CamCraft's commands.
  7. Reference - Look up units, machining terms, refusal messages and migration guidance.
  8. CAM fundamentals - The core machining challenges behind a good program, and what CamCraft does about each.